Photography Academy

Best TG-7 Settings with the Backscatter Mini Flash 2

Andrew's practical TG-7 and MF-2 starting setup for underwater macro.

← Photography Academy

Andrew Grundy and Di Syrett · MacroDivers

These are the settings I normally start a dive with when I use the OM System Tough TG-7 and Backscatter Mini Flash 2 for nudibranchs and other small subjects.

Our Recommended Starting Settings

Setting Recommendation
Shooting mode Aperture Priority / A Mode
Aperture f/8 as my normal starting point
ISO 100
External strobe Backscatter MF-2
Image quality RAW + JPEG
Focus mode AF-S
Close focus AF Super Macro
Drive mode Single shot
Image stabilisation On
Saved setup C1

Why We Prefer A Mode for General Macro

Many TG-7 users go straight to Underwater Microscope mode, and it is excellent for very tiny subjects. For general macro with a strobe, however, A Mode is my normal starting point. It lets me begin at f/8, keep ISO at 100 and concentrate on the subject rather than changing menus throughout the dive.

Why I Start at f/8

I normally want enough depth of field to keep the important parts of a nudibranch or other small animal sharp. I only change the aperture when the subject angle or the photograph I am trying to make gives me a clear reason to do it.

Backscatter Mini Flash 2 Starting Point

Situation Recommended Flash Setting
First dives with the system Smart Control Macro
General macro Smart Control Macro
Black background attempts Manual
Snoot photography Manual
Reflective subjects Change position or distance first; use manual when direct control is needed

Smart Control Macro is the MF-2's automatic option for normal close-up work. It keeps the lighting simple while I concentrate on buoyancy, composition and strobe angle. Manual means I set the output myself; that is the useful option for deliberate snoot work and controlled black backgrounds.

Strobe Position Matters More Than Settings

One of the biggest lessons in underwater macro photography is that lighting position matters more than small camera setting changes. A well-positioned strobe with average settings usually beats perfect settings with poor light.

  • Keep the strobe slightly above and to one side of the subject.
  • Aim the light across the subject, not directly into the sand.
  • Move the strobe before changing every camera setting.
  • Get close, but avoid pushing light through disturbed water.

Recommended Settings by Subject

Nudibranchs

  • Aperture: f/8 to start
  • Flash: Smart Control Macro to start
  • Focus point: rhinophores or face detail
  • Tip: shoot from slightly in front rather than directly above.

Shrimps

  • Aperture: f/8 to start
  • Flash: Smart Control Macro or manual
  • Focus point: nearest eye
  • Tip: side lighting helps reveal transparent bodies.

Frogfish

  • Aperture: f/8 to start
  • Flash: Smart Control Macro
  • Focus point: eye
  • Tip: use angled light to show texture.

Seahorses

  • Aperture: f/8 to start
  • Flash: keep the number of photographs to a minimum
  • Focus point: eye
  • Tip: leave space around the subject and avoid crowding the frame.

Simple In-Water Workflow

  1. Find the subject and settle your buoyancy.
  2. Move slowly and avoid disturbing the sand.
  3. Select the A-mode setup saved to C1: f/8, ISO 100, AF Super Macro and AF-S.
  4. Check that image stabilisation is on and the drive is set to single shot.
  5. Start the MF-2 in Smart Control Macro for ordinary close-up work.
  6. Place the strobe before taking the first frame.
  7. Focus on the eye, rhinophore or key detail.
  8. Review the image and histogram.
  9. Adjust strobe angle first, then power, then camera settings.

Common Problems and Quick Fixes

Image Too Dark

Move the strobe closer, check the fibre optic connection, confirm the camera flash is firing and increase flash output if using manual mode.

Image Too Bright

Reduce strobe power, angle the strobe slightly away from the subject or increase the strobe-to-subject distance.

Too Much Backscatter

Get closer, avoid finning up the bottom and angle the strobe across the subject rather than straight ahead.

Subject Not Sharp

Check AF Super Macro and AF-S, focus on the most important detail and take a few considered frames. With tiny subjects, even a few millimetres of movement matters.

Final Thoughts

The TG-7 and Backscatter Mini Flash 2 are capable of excellent underwater macro images. I start with the C1 setup above, then work on distance, position and light before changing menus. Once the lighting becomes repeatable, the whole system becomes far easier to use.

Use the Photography Glossary for plain-English explanations of the terms on this page, and read Responsible Underwater Photography before working closely with any animal.

Frequently asked questions

Why do I use ISO 100?

ISO 100 is my normal starting point because the MF-2 supplies the light and the lower ISO helps keep the image clean.

Why do I use AF-S and AF Super Macro?

AF-S gives me one deliberate focus action, while AF Super Macro is the close-focus option I use for small subjects on the TG-7.

Should I use Smart Control Macro or manual flash?

I use Smart Control Macro for normal automatic close-up work. Manual output is useful when I want direct repeatable control, especially with a snoot or black background.

What is C1 used for?

C1 stores my normal A-mode, f/8, ISO 100, AF Super Macro and AF-S setup so the camera is ready at the start of a dive.