Why are hand signals important in scuba diving?
Hand signals allow divers to communicate clearly underwater when speech is not possible. They help buddies manage direction, depth, gas, problems and safety decisions.
Diving Skills & Safety
Clear underwater communication for safer, calmer, better buddy diving.
Good hand signals make diving calmer, safer and more enjoyable. Underwater, your buddy needs to know whether you are OK, where you are going, how much gas you have and whether something has changed.
This guide starts with six widely recognised core scuba hand signals, continues with the full 29-signal memory aid, then shows one example convention for asking for and reporting remaining gas. Exact gestures and gas-pressure systems vary between agencies, regions and teams. Follow your formal training, the local dive briefing and the procedure agreed with your buddy or team.
Quick reference
A quick-reference guide to six widely used recreational signals: OK, problem, go up/go down, stop, buddy up and safety stop. Exact signals can vary between agencies, operators and dive teams, so review them during the dive briefing.
Comprehensive reference
Our broader reference sheet covers 29 recreational and contextual hand signals. Use it as a memory aid and review any local or agency-specific variations before the dive.
Gas checks
A practical example of one common recreational bar-signalling convention, including 100 bar, 150 bar, 120 bar, 50 bar / low on air and out-of-air communication. Exact conventions, turn pressures and reserve pressures must be agreed before the dive.
One common bar-signalling convention is shown below. Fifty bar reports cylinder pressure in this convention; it does not define a universal reserve. Turn, reserve and surfacing pressures come from the dive plan. Bar and PSI conventions vary, so agree the method before entering the water. If there is any doubt, show your SPG or dive computer directly.
Marine-life signals are useful, but they are much less standardised than core safety signals. Dive guides often use local signs for sharks, turtles, rays, octopus, nudibranchs and other animals. These can vary by region, guide and dive centre.
We plan to add a separate marine-life hand signals guide later, with clear notes on regional variation and source references.
After dark, standard hand signals still matter, but divers often use a torch to get attention or illuminate the signal so a buddy can see it clearly.
View night diving torch signals Diving Skills & SafetyHand signals allow divers to communicate clearly underwater when speech is not possible. They help buddies manage direction, depth, gas, problems and safety decisions.
The core safety and buddy signals are widely recognised, but some signals vary between agencies, instructors, regions and dive teams. Always review signals before the dive.
A common low-on-air signal is a clenched fist moved inward toward the chest. Divers should agree turn pressure and reserve pressure before the dive.
One common bar-signalling convention uses a T-shape for 100 bar, a closed fist for 50 bar, and one to four fingers for smaller increments. It is not universal. Fifty bar reports cylinder pressure in this convention; turn, reserve and surfacing pressures come from the dive plan. Agree the method before entering the water and show the SPG or computer if there is doubt.
No. Marine-life signs are often local or guide-specific. A shark signal may be widely understood, but many critter and fish signs vary between regions.